Energy for the New AgeAt least consider it!

i finally got the light to go on without using myself as Ground/Earth the things was i had to connect 1 wire to the bulb/ligt glass itself and then it goes on without ground/earth i also made a switch so i can boost the light power. i connected 4 wires to each leg of the light, instead of 2 as i have seen on some site on the net i placed the camera circuit inside a small box, and then i used speaker connectors to connect the light up to it, i made it like this so i can always reuse my inverter for other projects sofare this proof of concept works 100%

www.missouriwindandsolar.com this is part two , questions and answers on hooking up solar panels to a micro plug in grid tie inverter.

The project is complete. solar panel is done, lights,exhaust fan,ceiling fan,floor, water storage, and potting table is shown.

Began installation of 2KW solar panels made up of 20 DuPont 100 watt solar panels. I’m using common hardware found in your local hardwalre store such as: 1- Pressure treated 2×4x8 feet 2 -Pressure treated 2×12x8 fee 3 – 1/4 inch by 4 inch and 4.5 inch lag bolts 4 – 1/4 inch by 1-1/4 inch washers 5 – 2 inch corner braces 6 – 2-1/4 inch outdoor screws I will follow up with short detail video of the actual components and exactly what each is for.

This is the second part video that shows how the efficiency of the Tesnic turbine compares to the other wind turbines.