Do Solar Panels Increase The Risk of a Lightning Strike

Posted by admin | Posted in Solar Energy | Posted on 27-11-2010


www.solardave.com This is my 9th video interview with Tony Boniface President of Independent Power Systems filmed in Colorado. SolarDave: Do solar panels increase the risk of a lightning strike? Tony Boniface: Quick answer is yes. Anytime you put metal anywhere you are increasing the risk of a lightning strike. In terms of being concerned about it, there are very little reports about panels getting struck. A properly grounded system will minimize the likelihood of that happening. Has not been a problem and yes it will increase the likelihood. I would not be concerned about it. 2008 national code however is going to require that every single solar system have a lightning ground, so interestingly, if code thinks it is necessary they must be some issues going on. Or they are concerned once they is a substainal number of systems out there it could start having an impact and they need to be a little concerned with that. SolarDave: You think like a lightning arrestor? Tony Boniface: Nope, they want you to run a minimum No. 6 AWG copper wire off the array straight down to an auxilary ground rod which they are calling a lightning rod and unlike the rest of the grounding system it doesn’t necessary need to be tied to the rest of the ground system – they are considering a separate lightning ground.

How to Clean Solar Panels

Posted by admin | Posted in Solar Energy | Posted on 17-11-2010


How to clean Solar Panels: 2 Tablespoons of Dishwashing Soap 1 Tablespoon of Vinegar Jar of Water 3/4 Full 3 Terry Cloth Towels

Solar For Home Home Solar Panels

Posted by admin | Posted in Solar Energy | Posted on 09-11-2010


WINDENERGY7.COM – We have solar for home solar panels in stock and ship solar panels all over the US. Our complete wind hybrid systems feature both wind and solar as a hybrid system.

How to install solar panels on your roof quickly and cheaply – Part 1

Posted by admin | Posted in Solar Energy | Posted on 08-11-2010


Began installation of 2KW solar panels made up of 20 DuPont 100 watt solar panels. I’m using common hardware found in your local hardwalre store such as: 1- Pressure treated 2×4x8 feet 2 -Pressure treated 2×12x8 fee 3 – 1/4 inch by 4 inch and 4.5 inch lag bolts 4 – 1/4 inch by 1-1/4 inch washers 5 – 2 inch corner braces 6 – 2-1/4 inch outdoor screws I will follow up with short detail video of the actual components and exactly what each is for.

How It’s Made – Solar Panels FREE ENERGY

Posted by admin | Posted in Solar Energy | Posted on 08-11-2010


www.44energy.com HOW TO BUILD SOLAR PANEL energy home power solar energy efficient energy home heating energy conservation energy saving energy efficiency bill energy energy cost energy savings home bill energy homes save energy house energy energy audit home save…

Get Adobe Flash playerPlugin by wpburn.com wordpress themes

Powered by Yahoo! Answers